|
还有就是在施工过程中极易被忽视的浪费部分,锚固沟的设置不宜过大,有些单位为了省事,使用挖掘机进行挖掘,一般都以挖掘机挖头的宽度作为锚固沟的宽度,这样施工起来极为方便和快速。 There is also a waste part that is easily overlooked in the construction process. The installation of anchor ditches should not be too large. In order to save trouble, some units use excavators to dig, generally, the width of the digging head of the excavator is used as the width of the anchoring ditch, so that the construction is extremely convenient and fast.
但是这样下来也出现了非常大的问题,因为锚固沟作为地形最外沿的施工区域,是最大的周长,每增加10cm都会增加大量的土工膜使用。 But there are also very big problems, because the anchor ditch, as the outermost construction area of the terrain, is the largest perimeter, and each additional 10 cm will increase the use of a large number of geomembranes.
所以锚固沟的挖掘宽度和深度要控制在30cm,这样不仅能保证锚固强度,还能最大程度的减少土工膜在锚固部分的浪费,如果锚固沟已经挖宽挖大,也可以采取减少上甩边的方法来降低锚固使用量。 Therefore, the excavation width and depth of the anchorage ditch should be controlled at 30 cm, which can not only ensure the anchorage strength, but also minimize the waste of geomembrane in the anchorage part. If the anchorage ditch has been dug wide and dug large, if the anchorage ditch has been widened and dug, the method of reducing the up-throw edge can also be adopted to reduce the amount of anchorage.|
本文地址:/4644.html
|